代写 MIBT MIS101 – Business Information Systems

100%原创包过,高质量代写&免费提供Turnitin报告--24小时客服QQ&微信：273427

代写 MIBT MIS101 – Business Information Systems

© Deakin University MIS101 – Business Information Systems



MIS101 – Assignment Detail – Trimester 1, 2016

This is an individual assignment

DANGER DANGER DANGER DANGER DANGER DANGER DANGER DANGER

The main reasons students fail the assignment is because they fail to read this entire

document and attend all classes related to the assignment completion, TURNITIN submissions

and final assignment submission.

Compulsory Submission Deadlines: Note this assignment requires 3

submissions and ALL must be named as your Deakin College student

ID or they will not be marked.

1. Generation of TURNITIN Analysis Report for Part A (Fully

completed referenced & cited Part A) Due Date: Week 5 in

Class Tutorial (Compulsory)

2. Second Generation of TURNITIN Analysis Report for Part A

(Final version) Due Date: Week 7 by 18th April 2016 11.55 pm

(Compulsory)

 (If you submit after 18 th April 2016 11.55 pm the

submission will incur penalties as per the Deakin College

Assessment policy).

 Please Note: Your Part A TURNITIN submission must be

EXACTLY the same as the final Part A (joined with Part B)

submitted through the Assignment Submission Link in the

portal in Week 7 or it will not be marked.)

3. Submission of completed final version of assignment Due Date:

Week 07 – Thursday 21 st April 2016 (11:55 pm)

Both Part A and Part B combined into 1 file



Marks:

100 marks (This accounts for 40% of the total assessment of this unit).

Assignment Instructions:

Download the Assignment Detail document file and the (Word) Assign Template Part A and Part B files from

the Deakin College portal Week 3. Save the files into your H: Drive or OneDrive Account. Do not save them onto

a Flash Drive

For example: if your Student Number is CHXXD1402 then your file will be named accordingly as CHXXD1402‐

v1.docx. From this point forward you must progressively save your work as different versions e.g. answer q1

and save it as CHXXD1402‐v2.docx. Then answer q2 adding it to the file with q1 and save it as CHXXD1402‐

v3.docx. This will provide you with a safety net and you may be asked to submit this to the marking teacher

if there are issues with your final assignment. If you cannot produce these files then we will not be obliged

to mark your work.

Your assignment must follow the guidelines listed below or will incur penalties:

 The Assignment final submission must be produced using Microsoft Office Word 2010 or later version;

Mac users must check their assignment file can be opened on a non‐Mac computer in the Deakin College

labs before submitting. If you submit a file that cannot be opened by a staff member you will receive a

zero score and we will not accept another submission.

NOTE: The latest version of office is available to student for free through:

www.deakin.edu.au/software

It is called Office 365 and can be used via the cloud through OneDrive or downloaded onto your computer

or tablet. Just click on the image below when you enter the Deakin University Software site through the

hyperlink above and it will explain all in a video!

 TURNITIN submissions require .PDF file formats (see Assignment submission document in week 3 of

portal for instructions)



 Length is not to exceed 1600 words (not including the Reference list);

 Completing the ‘Assignment Plagiarism and Collusion’ quiz in week 7 of the Deakin College portal and

submitting your assignment in week 7 of the portal will acknowledge your agreement and undertaking

that you have not copied, colluded or cheated and that your assignment is all your own work with

regard to plagiarism. This will also display the final ‘Assignment Submission’ link.

 All citations used must be referenced and included in a Reference List placed at the end of Part A of the

assignment document using the Harvard Referencing Style (Author, Date) only. An explanation of this

method and general referencing is available at: Harvard Referencing Guide in Week 3 and Week 7 of the

subject in the Deakin College portal (Starts at page 48).

1. If a source is listed in the ‘Reference List’ of your assignment submission and is used for an

answer in Part A then the source must have originally been produced in English and not have required

translation into English. Translated sources used in the assignment will result in a zero mark for the

reference and the content included in an answer in Part A. Even if the content has been paraphrased.

The assignment consists of two parts. In Part A you are asked to answer a number of questions and you are

expected to provide fully researched and referenced answers. Furthermore, you are expected to use at least

ten (10) academically acceptable reference sources as a minimum to support your answers to the questions.

Failure to supply any correct references as in accordance with the Harvard Referencing Guide will result in a

zero mark and an Academic Misconduct report.

Part A answers can only be completed using electronic versions of journals and articles sourced

from the Deakin Library online facilities e.g. Deakin Library database of Journals, Articles and ebooks, as

a Deakin College student using your username and password or either of the accepted current MIS101

textbooks.

(Deakin Library web address: www.deakin.edu.au/library)

Any materials sourced in any other way will not be accepted for marking

Answers will only be accepted for marking if the online reference has been cited in the actual answer and

if the source is correctly referenced in Harvard style in the ‘Reference List’. Hence, it includes the hyperlink

to the correct online location for the full text. If the hyperlink does not work or is not present, the answer

will not be marked.



Don’t hyperlink URLs including the word ‘session’ as they will generally not work once you have closed

the article or journal because they are a temporary link and this means your content will not be marked!

e.g.

http://encore.deakin.edu.au/iii/encore/record/C__Rb3241155__Ssocial%20commerce__P0%2C

2__Orightresult__X6;jsessionid=764B61E8160308406C4800849FF188E3?lang=eng&suite=gol The correct

To log into the library as a Deakin College

student you can enter via either of these

locations:

Alumni and Community Borrowers (click)

or Deakin College then select ‘online

content’

Either of these choices will take you to

databases and ebooks available at Deakin

University.

Note: Not all content is available to Deakin

College students but there are plenty of

sources available to answer the assignment

questions



URLs to hyperlink should be sourced from the search list where the book or article is displayed rather than

the link once they are open for view e.g.

Correct View to hyperlink URL

NOT once the book or article is open



Part B of the assignment requires you to apply Toulmin’s Argument Model to analyse the case study located at

the end of this document to determine the validity or otherwise of the case study’s claim. Again reference any

additional information sources that you may use.

Assignment Completion Method:

Your assignment will involve two important phases, which will require you to:

If you click the link button it will create a

permanent link that you can copy and paste into

your reference list to use for your reference

hyperlink

Alternatively you can use the

permalink option sometimes

displayed in the tools bar at the

side or top of the opened

document/ebook



Part A:

Answer the following questions:

Question 1: Define organisational ‘Knowledge Management’ from an I.S. perspective. Discuss how Knowledge

Management Systems (KMS) uses the KMS cycle to help an organisation make the most effective use of their

knowledge.

Question 2: Define ‘Big Data’ identifying the three categories of data this term generally includes. Also identify

and explain the three general categories of problems associated with ‘Big Data’.

Question 3: Define Supply Chain management and detail how supply chain management (SCM) systems and

electronic data interchange (EDI) systems work to supports the supplier/customer relationship.

Question 4: Define eCommerce, LCommerce and MCommerce. Explain the impact of these mechanisms on

small business.

Part B:

Use the Toulmin’s Model of Argument to analyse the supplied Assignment Case Study (see the Assignment Case

Study section below) and provide your opinion on the strength or weakness of the argument with relation to

the Claim that we have provided. (~ 600 words).

You MUST answer the following 7 questions separately to complete the ‘Your Opinion’ section of Part B.

make sure to number your answers:

To apply the model to test the validity/strength of a CLAIM the reader must examine each sentence in the

article and categorise them as a Toulmin element or as an unnecessary extra

e.g. ‘opinion’, ‘hearsay’, ‘definitions’ etc. Once all sentences have been categorised then the elements

should be examined in sequence.

1. What is the CLAIM?

2. Is there any EVIDENCE to support the CLAIM? If so how much and how does it affect the strength of the

CLAIM.

3. Is there a WARRANT (Explicit or Implicit)? Explicit WARRANTS are often stronger because the author can

direct the reader to accept the CLAIM. Implicit WARRANTS leave the reader’s opinion open to

interpretation and this may go against the author’s intended purpose.

4. Is there BACKING? If so how much? If so how much and how does it affect the strength of the CLAIM.

5. Is there a REBUTTAL? The quantity and scope of the REBUTTAL may reduce the strength of the CLAIM

and thus dissuade the reader’s acceptance of the CLAIM.



6. Is there a QUALIFIER? If so, to what extent does it reduce the scope of the CLAIM because this will

impact on the strength of the CLAIM?

7. Your Opinion – this is a personal perception based on your interpretation of the article. The presence,

quality and quantity of the different Toulmin elements must be applied to make this critical assessment.

You must discuss whether you agree or disagree with the claim based on the stronger argument.

Assessment and Submission Instructions:

1. Week 5 Tutorial (Compulsory) ‐ Generation of TURNITIN Analysis Report for Part A (Referenced Draft)

Upload a fully referenced .PDF draft version of Part A (do not upload Part B) of your assignment through

the ‘Assignment Part A TURNITIN Analysis Link’ (located in Week 7 of the portal) to generate a similarity

report. This submission is not marked at this point but will show you plagiarism and collusion issues that

need to be addressed before your final submission. Check the similarity index rating and address any

problems identified.

a. Note: If you do not do the TURNITIN Report or if you do not address the changes required then

you may receive a penalty that could result in a zero mark for your assignment and an Academic

Misconduct Report on your student file.

2. Week 7 (Compulsory) ‐ Generation of a 2 nd TURNITIN Analysis Report for Part A (final version) Upload

a fully referenced .PDF final version of Part A (do not upload Part B) of your assignment through the

‘Assignment Part A TURNITIN Analysis Link’ in Week 7 ‘Assignment Part A TURNITIN Analysis Link’ to

generate the final similarity report. This report will be considered when marking your final assignment

submission. Check the similarity index rating. It must be no greater than 20% after you have deducted

scores related to the template similarities e.g. the name section or the questions.

e.g. if the similarity score total is 25% but the colour associated with the Assignment Template name

section and included questions (usually red) is 5% or higher then your similarity score is actually 20

because 25 ‐ 5 = 20.

3. Week 7 (Compulsory) ‐ Final submission – (You MUST read the assignment submission document

located in week 3 and 7 of the portal)

a. Unite Part A and Part B Assignment templates into one document (Do NOT put them in a folder).

Make sure Part A is at the beginning of the document followed by the reference list then Part B.

b. You will need to do the ‘Assignment Plagiarism and Collusion quiz’ in week 7 for the submission

link to be displayed.



c. Upload the ‘Assignment Template’ document which should now contain both Parts A and B (one

(1) electronic Microsoft Office Word 2010 (or later) file only, re‐named as your student number).

Make sure you have both Part A and Part B in this submission in the one file. It should be

submitted through Week 7 of the MIS101 subject in Moodle in the Deakin College portal via the

‘Assignment Submission’ link, selecting the ‘Assignment Submission’ folder to upload your

assignment document prior to the deadline stated above. Assignments submitted after the

deadline or via Email will incur a penalty as per the Deakin College Assessment Policy.

Online submission and joining of documents will be covered in the instructions in the Week 6 Tutorial.

We will only assess your formally submitted work as uploaded online through the ‘Assignment Submission Link’

in Week 7 of the MIS101 subject in Moodle in the Deakin College portal prior to the deadline stated above.

Important Notes:

It is your responsibility to ensure that the correct assignment file is submitted and the 2 TURNITIN report files

are generated on time and in exact accordance with the submission requirements accordingly:

 The final template file saved in a valid version of Microsoft Office Word (2010 or later);

 The file is not damaged in any way, and that the file can be retrieved and opened in Microsoft Office

Word (2010 or later) for review and marking. Mac users must check their assignment file can be opened

on a non‐Mac computer in the Deakin College labs before submitting. If you submit a file that cannot be

opened by a staff member you will receive a zero score and we will not accept another submission.

 You must check and verify that your submission was successful (do not ask your Lecturers or Tutors to

do this for you).

 If the submitted assignment file could not be retrieved or opened for marking, we will NOT ask for the

assignment resubmission and the final assignment mark will be entered as a ZERO (i.e. 0/100) result.

 No hard copy of the assignment is required and will not be accepted.

Learning Objectives:

In the process of this assessment task you will:

 Gain an understanding of:

o Knowledge Management and the associated benefits;



o Big Data and the associated problems;

o Supply Chain Management and the associated benefits;

o eCommerce and the benefits to small business

 Gain a fundamental understanding of Toulmin’s Model of Argument;

 Learn to apply the argument model for critical analysis of a case study; and,

 Demonstrate your critical thinking skills as applied to the argument Claim.

Assignment Case Study: This case study must be used for Part B

Claim: Your online reputation can ruin your future and there is nothing you can do about it.

You might not think about your online reputation very much but Janet Smyth U.S. Attorney’s

Public Relations Manager noted “In 2016 everyone’s online reputation has the power to change

your future for better or worse and is easily accessed”. Janet explained “How people perceive you

online can make a big difference in your life. Especially if you own a small business or present

yourself as a brand”.

Your online reputation has a lot of different pieces, whether you’re representing yourself as an

individual or a company, so there are many ways in which your reputation can be damaged.

Dr. Walter Palmer, a Minnesota dentist and trophy hunter who violated Zimbabwean law and killed

a tourist-favorite lion, has been the target of constant attack reviews on Yelp and other sites that

slander his person and business.

When Ashley Madison, the online dating service marketed to people who are married or in a

committed relationship was hacked, many people’s reputations were ruined, both online and in real

life.

Sometimes reputation loss results from an unfortunate coincidence: Having a name in common

with someone who has a bad reputation can result in your online reputation being tarnished. Other

times it is when a site isn’t reporting correct information about you. Such as with the case filed by

Dr Guy Hingston against Google. Dr Hingston claims that when you type "Guy Hin ..." into

Google the words "Guy Hingston bankrupt" appear in the auto-complete. He claims this is



defamatory as he is not bankrupt and has caused him to lose potential clients .

The point is that your reputation can be damaged in a wide variety of ways, including many that

you might not expect. However, Adam Chan a Google spokesperson says “people need to stop

blaming services like Google for reputation loss and take responsibility for their own online

reputations”. One of the best ways to monitor your personal or brand reputation is to Google it, as

this is how most people will first interact with you — if there’s a negative result on the second or

third page of Google, potential customers or employers might see it, and you need to be aware of it.

If your reputation has been damaged online then how you change the situation will depend on what

kind of negative information you find, sometimes a sincere apology is all that’s needed to have the

information retracted. There are also plenty of paid tools that offer this service as well, like Topsy,

Mention and IceRocket. In many cases, your reputation can get damaged when only one side of a

story gets out so sharing the facts online can help to reduce or stop the loss of reputation.

Janet Smyth noted, “Unfortunately, sometimes there’s just nothing you can do to get rid of a bad-

looking search result other than to counter it which may require an online reputation management

service”.

MIS101 Teaching Team

代写 MIBT MIS101 – Business Information Systems